Glass facade of NürnbergMesse with its lettering above snow-covered steps, Nuremberg Exhibition Centre during SPS 2025

Trade fair photographer · SPS 2025 Nuremberg

Trade fair photographer at SPS 2025: booth, live demos and a robot in Nuremberg

Trade fair photography at SPS 2025 in Nuremberg: the booth before opening, live demos, a humanoid robot. Including three social media clips.

Deutsche Fassung: Messefotograf auf der SPS 2025

As trade fair photographers we covered SPS 2025 at the Nuremberg Exhibition Centre on two days for two exhibitors: on Tuesday morning, 25 November, for a drive technology manufacturer in Hall 3A, and on Wednesday afternoon for a robotics exhibitor in Hall 6. SPS (Smart Production Solutions) is the trade fair for smart and digital automation. In 2025 it drew around 56,000 visitors and 1,175 exhibitors across 15 halls.

Before the doors open

The first images are taken before the show opens. The booth is set up and lit, the booth team is in place, only the visitors are still missing. This is when the booth architecture can be shown in full, the way stand builders and marketing teams need it. Once the doors open, the booth stays busy until the evening.

Booth of a drive technology manufacturer in Hall 3A at SPS Nuremberg before the show opens, still without visitors
Before opening: the booth is ready, the visitors are on their way.
Red booth portal with brand lettering, booth architecture at SPS 2025 in Nuremberg
Booth architecture before the visitors arrive.

Shortly afterwards the booth team lines up for the group photo. Until the doors open there is time for the details: giveaways, the booth bar, the first coffee.

Team photo of the booth staff before the show opens at SPS in Nuremberg
Group photo of the booth team before doors open.
Red tote bags as giveaways at the booth, SPS Nuremberg
The giveaways are ready.
Coffee pouring into a branded cup at the booth bar, morning at SPS
The first coffee at the booth bar.

Exhibits that work without words

Exhibits are the reason an exhibitor is at the show. We photograph them so that they work without explanation: gear motors in close-up, symbols, topic islands such as safety. Images like these later appear in product news, the show review and on LinkedIn.

Red gear motors on display in close-up, drive technology at SPS Nuremberg
Gear motors in close-up.
Cube with a robot arm pictogram and QR code as an exhibit detail, SPS Nuremberg
Small details tell the show’s theme.
SAFETY lettering as booth design, machine safety topic island at SPS
Topic islands at the booth, here safety.

Hands-on technology

At SPS, technology is demonstrated, not just displayed. At the booth, visitors used a mixed reality headset to work on a real gear motor while the instructions ran on the screen next to it. For the picture, what counts is the moment when hand, headset and screen line up.

Visitor with a mixed reality headset working on a gear motor, live demo at SPS 2025 in Nuremberg
Hand, headset and screen in the same moment.
Trade visitor wearing a mixed reality headset at the booth at SPS in Nuremberg
Mixed reality to try out.
Trade visitors at drive technology exhibits, busy booth in Hall 3A at SPS
Hands-on technology draws trade visitors.

Capturing conversations without interrupting

Trade fairs live on conversations. We capture them without interrupting: from a distance, with a long lens, at the right moment. The strongest images show a reaction, like two visitors watching an exhibit intently.

Two visitors watching an exhibit intently, trade fair reportage SPS Nuremberg
The reaction makes the picture.
Conversation at an exhibit beneath the brand logo, booth at SPS Nuremberg
First conversations before the big rush.
Consultation between two specialists at the booth, SPS 2025
Capturing conversations without interrupting them.

When the hall fills up

Over the course of the morning the booth fills up. Wide angles and longer exposures now show how busy it is: the stream of visitors in front of the red portal, the full booth bar, the light ring above the centre of the booth. These images document the success of a show presence, both internally and externally.

Visitor flow in front of a booth with motion blur, hall view at SPS 2025 in Nuremberg
A longer exposure shows how busy it is.
Red booth portal with a stream of visitors in Hall 3A, SPS Nuremberg
The same portal as in the morning, now with visitors.
Light ring with brand lettering above the centre of the booth, visitors at SPS 2025
The light ring as a meeting point at the centre of the booth.
Busy booth bar with visitors in the morning, SPS trade fair Nuremberg
By late morning the booth bar is full.
Wall with the brand claim “Your success is our drive” at the booth
Closing shot of the morning.

Day 2: the robot that drew the crowds

On Wednesday afternoon we moved on to Hall 6, where a humanoid robot wearing a red bow tie was the centre of attention. It walked across the booth, sat down with guests and drew trade visitors in from the aisles.

The brief here was three vertical 4K clips for social media, along with around 20 photos for website and marketing. Clips and photos were ready on Friday.

Clip 1: The robot walks across the booth.
Clip 2: Chess robot and VR control.
Clip 3: Crowds at the booth.
Humanoid robot wearing a red bow tie at a booth in Hall 6 at SPS Nuremberg
The star of the booth.
Head of a humanoid robot with a blue light ring and a red bow tie, detail from SPS 2025
Blue light ring, red bow tie.
Humanoid robot sitting among visitors in the booth lounge, SPS Nuremberg
The robot joins the guests.
Trade visitors gather around a humanoid robot in Hall 6 at SPS 2025 in Nuremberg
Trade visitors stop in the aisle.

Trade fair photography at SPS

A day at a trade fair has a fixed rhythm: booth shots before the doors open, then team, exhibits, live demos and conversations, and finally the full hall. As a trade fair photographer in Nuremberg we know the routes through the exhibition centre and when a booth is empty or full. Our trade fair photography covers booth architecture, team photos, exhibits, live demos and vertical clips for social media. Packages and prices for exhibitors are on our page Photographer for SPS.

Planning your presence at SPS? Get in touch.

Source: SPS 2025 final report (Mesago Messe Frankfurt). Photos and clips: Dirk von Honnerlagengrete

Frequently asked questions

When did SPS 2025 take place?

SPS (Smart Production Solutions) ran from 25 to 27 November 2025 at the Nuremberg Exhibition Centre, with around 56,000 visitors and 1,175 exhibitors in 15 halls.

When is the next SPS?

SPS 2026 takes place from 24 to 26 November 2026 and SPS 2027 from 23 to 25 November 2027, both at the Nuremberg Exhibition Centre.

When is the best time to photograph a trade fair booth?

In the morning before the doors open, when the booth is set up and lit and no visitors are there yet. After that, a large booth stays busy until the evening.

Do you also shoot video?

Yes. We shoot quick vertical clips for social media, filmed at the booth and edited at short notice, as well as corporate films with or without interviews. At SPS 2025 we produced three 4K social media clips for a robotics exhibitor.

How much does a trade fair photographer in Nuremberg cost?

The package covers up to 1.5 hours on site and starts at €390 plus VAT, commercial image rights included. Extensions are possible on site.

How quickly will I receive the photos?

The edited selection is delivered within three working days. If you need the images sooner, for example for social media on the same day, express delivery is available for an extra charge.

Dekorativer Hintergrund

Your trade fair presence in pictures

Booth, team, exhibits, live demos or vertical clips: as trade fair photographers in Nuremberg we deliver images for press, website, social media and magazines.